casboards.blogg.se - Qualcomm qpst drivers

The provided Qualcomm USB drivers could be installed on any 32-bit or 64-bit Windows PC via two different methods. How to Install Qualcomm HS-USB QDLoader 9008 Drivers?

64-bit version: QDLoader_HS-USB_Driver_64bit_Setup.exe.

32-bit version: QDLoader_HS-USB_Driver_32bit_Setup.exe.

Make sure to download the USB Drivers as per the ‘Installation Method’ you chose.

After the installation process is over, you may exit the Test mode by entering the below code:ĭownload Qualcomm HS-USB QDLoader 9008 Drivers.

Type in the following code in the CMD window:.

This can be done by entering the ‘Test Mode’.

If you are running Windows 8 or later versions, make sure to turn off ‘Driver Signature Verification’ on your PC.

Also, enable the ‘ USB Debugging‘ (present under ‘Developer Options’) on your device.

You could refer to our guide on how to download and install them. Download and install the latest version of ADB and Fastboot tools.

However, if you prefer to install the drivers using the ‘Direct Method’ then you may skip this part. Prerequisitesįollow the below points only if you are going to install the Qualcomm HS-USB QDLoader 9008 Drivers via the ‘Manual’ method. The instructions below will help you install these USB drivers on any Windows 11/10/8.1/8/7 PC with 32-bit or 64-bit architecture. So, if you want to unbrick your device, you must first download the required Qualcomm USB drivers and install them on your PC. And for that, your device must be booted into EDL mode and recognized as ‘ Qualcomm HS-USB QDLoader 9008‘ by your Windows PC’s Device Manager. But if your device is running a Qualcomm Snapdragon processor, then there’s a chance you can download and install the stock firmware using QPST tool to recover your device from the bricked state.